The TDL multi-function timer allows you to set a definitive time duration to operate.
There are 4 input types that it can have:
Off Delay (loss of 12Vdc on the input gives an OFF delay on the output)
On Delay (gain of 12Vdc on the input gives ON delay on the output)
Off Pulse Trigger (the 12Vdc input is lost for a moment which gives an OFF delay on the output)
On Pulse Trigger(the 12Vdc input is lost for a moment which gives an ON delay on the output)
There are 16 time intervals to choose from which are preset and selected by a rotary dip switch
The time intervals are as follows:
|
sec |
sec |
sec |
sec |
sec |
sec |
sec |
min |
min |
min |
min |
min |
min |
hr |
hr |
hr |
Time |
1 |
2 |
5 |
10 |
15 |
20 |
30 |
1 |
5 |
10 |
15 |
20 |
30 |
1 |
1.5 |
2 |
Dip Switch Position |
0 |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
A |
B |
C |
D |
E |
F |
Features
- Off Delay (loss of 0Vdc on the input gives an OFF delay on the output)
- On Delay (gain of 0Vdc on the input gives ON delay on the output)
- Off Pulse Trigger (the 0Vdc input is lost for a moment which gives an OFF delay on the output)
- On Pulse Trigger (the 0Vdc input is lost for a moment which gives an ON delay on the output)
- Time duration is easily set via the rotary dip switch, as listed on the board.
- Set time will not drift as the components age or the temperature fluctuates.
- On board LED's indicate that the board has power, that the input has been operated, that the timer is counting down and that the output is triggered.
- Raising clamp type terminals will not damage cables and can accommodate up to a 2.5mm2 cable
- Contact rated at 8 Amps AC/DC
- Fits TDL-MB mounting system
Specifications
- 1 Second to 2 Hour selectable
- Operating Voltage 9 to 16Vdc - 17mA at 13.6 Vdc standby and 57mA energised
- Input terminals for a switched contact or a negative trigger
- Single Pole Double Throw relay output
- Contacts rated at 8 Amps AC/DC
- Dimensions: 110mm (w) x 60mm (h) x 23mm (d)